All

Online Shop.

For all your Commercial and Leisure vehicle products

Sale!

Sterling Power Pro Charge Ultra 230v 12V 50A Mains to DC Battery Charger – PCU1250 [3 OUT]

£459.00 Exc. VAT

Sterling Power Pro-Charge Ultra 12V 50A Battery Charge.

Product Description

Sterling Power Pro-Charge Ultra 12V 50A Battery Charger – PCU1250 [3 OUT]

This PCU1250 is part of the latest range of battery chargers to be launched by Sterling, with added features that make these extremely capable products to look after your batteries.

The 32 LED front panel provides information regarding Voltmeter, Ammeter, Charger output display bar, Charging statuses, Battery chemistry select, Temperatures and Voltage warnings.

Features:

  • 50A Charging output (12v)
  • 3 separate charging outputs
  • Output, status and power reserve displays
  • Battery temperature sensor
  • Remote control is optional (not included or priced in this listing)
  • Easy to install and wire up
  • 5 Year Warranty

Specification:

  • DC Voltage: 12
  • Amps: 50
  • Outputs: 3
  • Dimensions: 315 x 215 x 90
  • Weight: 3.0kg

New features on this product surpassing that of standard battery chargers include:

  • 11 pre-programmed battery curves including: Open/Sealed lead acid, AGM, Gel, LiFePO4.
  • 1 custom set, can be set from charger, unlike our competitors there is no need for a computer to do this operation, all can be done from the front panel.
  • 2 x digital meters for current and voltage measurement and a 32 LED information display.
  • 1 x power meter to show what reserve power left in the unit.
  • PFC, active, up to 0.99 PF, ensuring efficient power conversion, up to almost 90% as opposed to about 60% for older, non-PFC technology.
  • % power reduction to allow unit to work with restricted power available (available on local control or remote control panel).
  • De-sulphation auto cycle built in to software.
  • New, low activity, standby mode to increase battery life.
  • Battery health program every 7-10 days .
  • Multiple speed fan control. This reduces unnecessary fan noise experienced by the customer, even though the new extreme efficiency reduces the need for fans. At high ambient temperatures  (40-50 deg C), however, fans would still be required to ensure operation.
  • Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
  • 32 LED information panel to ensure maximum information transmitted to owner.
  • Internal scan and systems check to ensure product is okay.
  • Remote control option.
  • Small footprint and light weight.
  • Include battery temperature sensor to give temperature compensation and high temp trip.
  • As with all our marine chargers all metals used are non-ferrous or heavily protected, so no corrosion.
  • New synchronised rectification output as opposed to diode output, giving up to an extra 9% efficiency.
  • Conforms to ABYC drip test, is waterproof from water directly dropped on to the top of the unit (+/ – 17 deg) if installed correctly (vertically).
  • Thermostatically controlled force draft cooling.
  • The printed circuit boards are conformal coated for high humidity and salt air operations.

Additional Specification

USA California Energy Commision (CEC) listed:
CEC regulation stipulates that the charger is only on when necessary. This reduces AC power consumption and lowers operational costs
while maintaining healthy batteries. (default setting is on, CEC can be turned off)

Synchronized Rectification:
Mosfet technology, increases overall efficiency over diode based chargers by approximately 8 percentage points.

Automatic Desulphation / Equalization mode:
7-10 days cycle with anti-stratification program to keep batteries rejuvenated.

Voltage + Current LED display:
2 LED matrix displays. Left side is the voltmeter and the right side is the ammeter.

Performance monitoring LED bar:
An LED display to show what rate the charger is operating at.

Redundant safety system:
In event of failure, the processor provides another system to shut off device, doubling security. The primary emergency backup is digital, the secondary system is analogue both are totally independent of one other.

High temperature ambient operation rating:
Most chargers are only continuously rated at 20 deg C (if even) this unit is rated at continuous operation at 40 deg C ambient.

Multiple speed fan control:
This reduces unnecessary fan noise experienced by the customer, even though the new extreme efficiency reduces the need for fans. At high ambient temperatures (40-50 deg C), however, fans would still be required to ensure operation.

Thermostatically controlled force draft cooling:
To ensure that when the cooling is actually required the noise level is a low as possible for the environmental and power conditions.

The printed circuit boards are conformal coated:
For high humidity and salt air operations.

% power reduction:
To allow unit to work with restricted power available (available on local control or remote control panel).

Multiple chargers:
Multiple chargers can be put in parallel to increase current rating. This is also great for redundancy.

Datasheet

PCU Pro Charge Ultra Datasheet

Product Enquiry

Can’t find what your looking for or require more information?
Call us on 01623 659311 or email sales@pbautoelectrics.co.uk or complete the contact form below:

    Your Name (required)

    Your Email (required)

    Part No. (required)

    Subject

    Your Message

    Anti SPAM - Please input the code below: (required)

    captcha

     

    Back to Top