Online Shop.

For all your Commercial and Leisure vehicle products

Sterling Heated LiFePO4 12V 200Ah Lithium Iron Phosphate Battery with BMS & AMPS App – LH12200

£662.00 Exc. VAT

A 200h heated Lithium Iron Phosphate 12V Leisure Battery (5 Year Warranty). Ideal for enviroments that are exposed to cold temperatures.

Please Note: This item is dispatched direct from our supplier and as such is not available to ship outside of mainland UK.

Product Description

Sterling Heated LiFePO4 12V 200Ah Lithium Iron Phosphate Battery with BMS & AMPS App – LH12200

# Currently due into stock approx late Decemeber 2023 #

A 200h heated Lithium Iron Phosphate 12V Leisure Battery (5 Year Warranty). Ideal for enviroments that are exposed to cold temperatures like temporary / mobile traffic lights, mobile security, power in your shed or garage – unheated property, power in your vehicle / boat that is left frequently in cold environments (North Europe). If boat is left unoccupied in a Marina during cold seasons, for example. Works vehicles where rear area is prone to sub zero temps. Also where heated batteries are possibly unnecesarry, live on board vehicles, typically no area gets to subzero temperatures, frequently used RV / campervans. Unlikely temperatures reach subzero.

Lithium Iron Phosphate cells should be above 0DegC when charging. The heater uses your charger power to warm the battery up to +5DegC – if the battery was at 0DegC or lower. Discharging your battery is okay down to -20DegC.

The LH series use a JBD BMS with Bluetooth and heating elements:

  • LH12100 – 50W – JBD-DP04S007-L4S-100A
  • LH12200 – 100W – JBD-DP04S007-L4S-200A

These elements require at least this power to warm the battery – please ensure your battery charger / DC DC charger are powerful enough to engage the heating element. The heater comes on provide the cells temperature is at 0DegC or lower AND there is 50W | 100W of available power. Once the temperature hits 5DegC, the charge circuit engages to allow for charging current to flow into the battery.


  • LiFePO4 12V (nominal) 200 Ampere hour (200Ah)
  • Bluetooth interface for battery information
  • Low temperature battery disconnect (0’C for charge, -20’C for discharge)
  • Over voltage disconnect (14.8V or above on input)
  • Low voltage disconnect
  • Cell imbalance disconnect (Cell voltage differential of above 0.3V)
  • Automatic cell voltage balancing
  • Over current disconnect protection
  • Short circuit protection
  • 8mm ring terminal battery studs / washer
  • Weight of battery (kg) 22KG
  • Dimensions of battery: 50.5L x 25.5H x 17.2W (cm)
  • Warranty: 5 Years


Technical Specification

  • Battery Capacity: 200 Ampere hour (200Ah) | 2560Wh LH12200
  • Nominal Voltage: 12V
  • Battery Chemistry: LiFePO4 Chemistry – Prismatic cells
  • Series Limit: 4 (48V bank)
  • Parallel Limit: Infinite
  • Dimensions and Weight: 50.5L x 25.5H x 17.2W (cm)
  • Operating Temperature: Charge – 0’C to 60’C // Discharge from -20’C to 60’C – Integrated heater for low temperature operation
  • Operating Voltage: 13.6V (4S x 3.4V)
  • Charge Voltage: 14.2V-14.6V, 14.4V recommended
  • Float Voltage: 13.4V-14.0V, 13.8V recommended
  • Max Continuous Charge Rate: 1C (200A)
  • Max Continuous Discharge Rate: 1C (200A)

Bluetooth App

Android app file download – here:

Apple app file download – here: ##

When designing the LB series of batteries, we realised quickly that the advanced system required the highest build quality to ensure best operation for our users and customers. We have used only the best cells and housing we could find to ensure that this premium product performs and feels as good as you want it to.

The faceplate of all LB batteries features a small and simple battery monitor gauge to give you a brief estimate on the capacity remaining in the battery, at the push of a button.

While we hope we never need to service a battery, the top-plate of the lithium case is removable (sealed by screws) to gain access to the BMS and battery system within. This should only be done by AMPS technicians.

Our premium battery deserves a premium BMS system and the LB series of batteries benefits from our bespoke AMPS app. Offering the client/user information on how long the battery has until it is fully charged or depleted, the current coming in or out of the battery (down to a fraction of an Amp), the state of charge of the battery, the capacity of the battery and the temperature of the battery system.

The app also has a number of user-first additions, including easy access to AMPS support information and the ability to rename your batteries to best organise what is what in your system.

Product Enquiry

Can’t find what your looking for or require more information?
Call us on 01623 659311 or email or complete the contact form below:

    Your Name (required)

    Your Email (required)

    Part No. (required)


    Your Message

    Anti SPAM - Please input the code below: (required)



    Back to Top