Product Description
Labcraft Banksman LED Reg 23 & Reg 48 Manoeuvring Light 10-32v – BM3_4-2MV
A single Labcraft Banksman LED Reg 23 & Reg 48 Manoeuvring Light, 10-32v. Suitable for refuse vehicles and other vehicles operating at night.
The Labcraft Banksman lighting solution is a driver aid designed to deliver additional light to the areas around the vehicle when manoeuvring. The solution delivers light into areas traditional reversing lights cannot cover. LEDs are fitted around the chassis to direct pure bright light downwards and away from the vehicle, illuminating the area around and creating a safer working environment.
Features
- Regulation 23 manoeuvring light approved for pre-registration installation
- Regulation 48 approved
- 956 lumens covering over 20m2
- Solid aluminium base
- Multi-voltage (10-32V)
- Toughened lenses for resilience
- IP66/IP67 rated for all weather conditions
- 5 year warranty
Long Life High Intensity CREE LEDs
The Banksman range utilises the latest LED technology to give a high intensity light source to provide enhanced brightness.
Installation
Banksman solutions are simple to install and connect directly to the vehicle loom. This innovative solution can be fitted as standard to new vehicles or retrofitted to an existing fleet. Can be operated not only in reverse but also going forwards with automatic cut-out option up to 10khm.
Video
Made in the UK
All Banksman products are manufactured in the UK by Labcraft; manufacturer of the largest range of commercial vehicle interior low voltage LED lighting in the world.
Further Labcraft Banksman information can be found on our news post here >>
Features
Regulation 23 approved
The Banksman BM3 is the first manoeuvring light to be launched in Europe to enable OEMs, Operators and Fleets to meet Regulation 48 directives for lights installed pre-vehicle registration.
956 lumens
Long life, high intensity Cree LEDs product a clean white light generating 956 lumens and a light spread of over 20m2, creating a safer working environment.
Solid aluminium base
This gives a robust product and ensures the LEDs run as cool as possible for longer life.
Multi-voltage (10-32V)
Engineered to suit a broad range of vehicles and voltages, the circuit can withstand changes in voltage and will provide consistent light output.
Waterproof to IP67
The tough outer enclosure and potting over more sensitive components provides protection against severe weather conditions and pressure washing.
REG 23 Compliance
The new BM3 Banksman R23 light is the first manoeuvring light to be launched in Europe enabling OEMs, Operators and Fleets to meet Regulation 48 directives for lights installed pre-vehicle registration.
What is REG 23?
Reg 23 defines the specification of Reversing & Manoeuvring lamps. Key points for REG 23 compliance are:
- Colour of light MUST be White.
- The intensity of the light must not exceed 500cd (candela).
- The light must not have an intensity of more than 0.5cd in the field of view where light must not be seen.
What is REG 48?
Reg 48 defines how and where these lamps must be installed on a vehicle. Key points for REG 48 compliance are:
- They have to be activated by one of three conditiond, the simplest one being the vehicle being put into reverse gear.
- They must switch off above 10km/h (6.4mph) in forward motion.
- The illuminated part of the lamp must not be seen on a plane 10m away from the vehicle.
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
Can’t find what your looking for or require more information?
Call us on 01623 659311 or email sales@pbautoelectrics.co.uk or complete the contact form below:
Nicola M (verified owner) –
Was this review helpful to you?